RCC Pipes

While RCC pipes can cater to the needs where pressures are upto 3.0Kg/cm2 and C.I and steel pipes cater to the needs of higher pressures around 24 Kg/cm2, the P.S.C pipes cater to intermediate pressure range for which the metallic pipes are expensive while RCC pipes would not be suitable . The strength of a P.S.C pipe is achieved by helically binding high tensile steel wire under tension around a concrete core there by putting the core into compression. When the pipe is pressurized the stresses induced relieve the compressive stress but they area not sufficient to subject the core to tenslie stresses. The prestressing wire is protected against corrosion by a surround of cementatious cover coat giving at least 25mm of cover.

Concrete Pipes

 

Our customers have entrusted us with the responsibility of manufacturing a complete range of Concrete Pipes. These pipes are manufactured using advanced technology and quality raw material in compliance with international quality standards. We make sure that the concrete pipes as precisely machined to suit specific technical requirements of our customers. Manufactured in customized dimensions, we offer desired quantities of Concrete Pipes at industry leading prices and deliver these within a given time span.

 

Key features of the concrete pipes provided by us are:

• Compressive strength
• Absorption
• Low water/cement (W/C) ratios
• Accurate content

Our range of RCC pipes are hugely demanded for various construction and plumbing purposes. These are manufactured with qualitative raw material and are appreciated for its finishing and strength. On the basis of the customers’ requirements, we offer tailor-made solutions for our range.

We manufacture quality RCC (Reinforced cement concrete) pipes that are used for water supply schemes, drainage works, culverts and other purposes. Produced by centrifugal spinning process & tested on various parameter, all our pipes comply with IS458:2003 specifications. Our range of RCC pipes are available in different constructions such as plain type, spigot type, socket end type, tung type and groove end type.

Specifications :
Diameter: 100mm to 2000mm
Class: NP2, NP3, NP4.